Handboard models and parts processing are very common in the industrial market. It is also a process that product R & D must go through. Only when the handboard is done well can it be made in batch, which can help enterprises reduce R & D costs and risks and quickly seize the market. What materials should be used to make the newly designed hand board model to meet the requirements of the designer? We list some commonly used hand model making materials, analyze their characteristics, and you can easily know what kind of materials you need.

手板模型换个零件加工所用的材料主要分为金属和塑胶，其中金属*常见的就是铝合金和不锈钢这两种，铝合金的密度低，但强度较高，加工性能、优良的焊接特点及电镀性、良好的抗腐蚀性、韧性高及加工后不变形、材料致密无缺陷及易于抛光、上色膜容易、氧化效果等优良特点，经过喷砂氧化处理之后，外观效果会更好。不锈钢耐空气、蒸汽、水等弱腐蚀介质，耐酸、耐碱性能，密度高、耐腐蚀的特性比较好、不易损坏。

The materials used for the processing of another part of the handboard model are mainly divided into metal and plastic, of which metal * is commonly aluminum alloy and stainless steel. Aluminum alloy has low density but high strength, processing performance, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, dense material without defects and easy polishing, easy coloring film Oxidation effect and other excellent characteristics, after sand blasting oxidation treatment, the appearance effect will be better. Stainless steel is resistant to weak corrosive media such as air, steam and water, acid and alkali resistance, high density, good corrosion resistance and not easy to be damaged.

塑胶常用的材料有ABS、POM、PMMA、PA、PC、PP、PPS等，

Commonly used plastic materials include ABS, POM, PMMA, PA, PC, PP, PPS, etc,

其中，ABS是一种工程塑料，在手板行业中比较常用的塑胶材料，抗冲击性、耐热性、耐低温性、耐化学药品性及电气性能优良，还具有易加工、制品尺寸稳定、表面光泽性好等特点，可以拆件加工，可以满足各行业产品的基本要求。

It is a kind of plastic products with good impact resistance and heat resistance, which can meet the basic requirements of various industries. It can also meet the requirements of plastic products in terms of low-temperature processing and heat resistance. It can also be used in the electrical industry.

POM：又叫赛刚，看这个名字就知道，是一种表面光滑且光泽度较好的硬而致密的材料，弯曲强度、耐疲劳强度，耐磨性都比较好，适合做一些齿轮的零件。

POM: also known as saigang, it is a hard and dense material with smooth surface and good gloss. It has good bending strength, fatigue strength and wear resistance. It is suitable for making some gear parts.

PMMA:俗称亚克力，透明度较好，透明效果比PC材料好，且耐热性优良。

PMMA: commonly known as acrylic, it has good transparency, better transparency effect than PC material, and excellent heat resistance.

PA：又称为尼龙，机械强度高，韧性好，不粘胶水，不建议拆件加工。PC:冲击强度高，尺寸稳定性好，无色透明，着色性好、耐磨性好，可以耐高温，是一种透明材料。

PA: also known as nylon, it has high mechanical strength and good toughness. It does not stick glue. It is not recommended to disassemble parts for processing. PC: it has high impact strength, good dimensional stability, colorless and transparent, good coloring and wear resistance, and can withstand high temperature. It is a transparent material.

PP:聚丙烯，密度小，强度刚硬，硬度耐热性均优于低压聚乙烯，可在温度100°左右使用。

PP: polypropylene, with small density, rigid strength, hardness and heat resistance, is better than low-pressure polyethylene, and can be used at a temperature of about 100 °.

PPS:是一种耐高温材料，可以在230度的温度下不会产生变形。通过以上的手板制作材料性能特点介绍你清楚了自己的手板模型该用什么材料制作了吗?如果还有疑问，请联系我们。

PPS: it is a kind of high temperature resistant material, which can not deform at 230 degrees. Through the introduction of the performance characteristics of the above hand board making materials, do you know what materials your hand board model should be made of? If you have any questions, please contact us.