行业动态
产品
联系嘉瑞杰
制造手板模型需求留意什么
来源：http://dcjzl.com作者：哈希28单双发布时间：2022-10-13
手板模型上的各种零件应有足够的强度及刚度，避免运用过程中损坏和变形，手板模型上的各种零件应有足够的强度及刚度，避免运用过程中损坏和变形，紧固零件要有防松动措施，避免不测伤害操作者。济南手板厂家为您讲解下更多事项。
Various parts on the hand model shall have sufficient strength and stiffness to avoid damage and deformation during operation. Various parts on the hand model shall have sufficient strength and stiffness to avoid damage and deformation during operation. Anti loosening measures shall be taken for fastening parts to avoid accidental injury to operators. Jinan prototype manufacturer will explain more things to you.
不允许在加工过程中发生废料或工件飞弹现象，影响操作者的留心力，以致击伤操作者。别的要避免冲裁件毛刺割伤人手。手板模型手板模型制作加工时的留心事项1.手板模型工艺路途制定可先依照工件需求分两次加工。
It is not allowed to produce waste materials or workpiece missiles in the processing process, which will affect the operator's attention and cause injury to the operator. For others, avoid cutting hands by burrs of blanking parts. Cautions during the production and processing of the prototype. 1. The process route of the prototype can be divided into two processes according to the needs of the workpiece.
先加工手板模型的外观内壁，铣好基准，再翻转180度装夹，加工表面面及按键屏幕方位。若先加工表面面，再加工内壁，则难以定位装夹中止二次加工。假设手板模型的壁厚只要1.5mm,加工表面面时易呈现变形、破碎的现象。
First, process the exterior inner wall of the hand model, mill the benchmark, then turn over the 180 degree clamp, and process the surface and key screen orientation. If the surface is processed first and then the inner wall is processed, it is difficult to locate the clamp and stop the secondary processing. Assuming that the wall thickness of the hand model is only 1.5mm, it is easy to appear deformation and breakage when machining the surface.
如有在已加工好的型腔中参与填充物做出支撑。这样可避免加工出通孔部位，再填充石膏，否则很难别离废品和填充物。
If any, the filler shall be used to support the machined cavity. In this way, it can avoid processing through holes and filling gypsum, otherwise it is difficult to separate waste products and fillers.
要先修正修剪的曲面，掩盖住表面通孔方位，中止正面加工，然后再中止挖槽完成通孔加工，避免加工到通孔部位加工时刀路起伏不顺畅，切削力不平均等现象。
The trimmed surface shall be corrected first to cover the through hole orientation on the surface, and then the front face processing shall be stopped, and then the slotting shall be stopped to complete the through hole processing, so as to avoid such phenomena as unsmooth tool path fluctuation and uneven cutting force when machining to the through hole.
通常一家高质量的手板模型厂无论是手板模型的精度公役、或者是表面处置、或者是效劳态度都是有一定的确保的，您对此有什么问题或者需求就来我们网站http://dcjzl.com咨询吧！
Generally, a high-quality prototype factory ensures the accuracy, surface treatment and service attitude of the prototype. If you have any questions or needs, please come to our website http://dcjzl.com Consult!
上一篇：为什么要进行手板打磨？
下一篇：快速成型技术的相关特点分析
相关资讯
手板制作加工时注意事项
2024-04-11手板加工如何服务好客户?
2024-04-09手板加工的过程及方式
2024-04-06快速成型的基本原理构成有哪些？
2024-02-27工业产品设计中常见手板件的制作方式
2024-02-23ABS手板模型的优势有哪些？
2024-02-21铝合金手板模型制作手法与维护
2024-02-10铝合金手板模型的氧化工艺介绍
2024-02-10汽车手板模型制作的低压灌注工艺
2024-02-06手把手教你怎么选机箱机柜定制工厂
2024-01-27
