行业动态
产品
联系嘉瑞杰
3D打印结构手板和外观手板模型的区别
来源：http://dcjzl.com作者：哈希28单双发布时间：2022-11-01
在工业产品设计生产中，手板原型打样是一个重要的过程，通过样板打样可以很好的对产品进行验证，手板验证主主义分为结构手板和外观手板，这些手板都是可以通过3D打印来完成的，那么3D打印结构手板和外观手板有什么区别呢？下面济南手板
厂家为您讲一讲。
厂家为您讲一讲。In the design and production of industrial products, prototype proofing is an important process, through which products can be well verified. Prototype verification can be divided into structural prototype and appearance prototype, which can be completed through 3D printing. What is the difference between 3D printing structural prototype and appearance prototype?
3D打印结构手板主要用于验证产品的结构合理性，对于手板尺寸要求比较精准，对手板外观要求相对较低，国外客户对这类要求尤为严格,结构手板可直观的反映出结构的合理与否，安装的难易程度，便于及早发现问题，解决问题。
The 3D printing structural prototype is mainly used to verify the structural rationality of the product. The requirements for the size of the prototype are relatively accurate, while the requirements for the appearance of the prototype are relatively low. Foreign customers are particularly strict with these requirements. The structural prototype can directly reflect the rationality of the structure and the difficulty of installation, so that problems can be found and solved as early as possible.
如果把手板从功能的角度来划分，就可以分为外观手板和结构手板。非结构手板也叫外观板，就是只看外观的，不需要活动的,所谓外观手板就是只要求手板的外观跟设计产品相似，或者跟产品一模一样，不要求它能起到什么作用，像这样的产品是不能够用来销售的，主要是用来参展的，为的是做好前期的宣传工作。
If the prototype is divided from the perspective of function, it can be divided into appearance prototype and structure prototype. The non structural prototype is also called the appearance board, which only looks at the appearance and does not need activities. The so-called appearance prototype is that it only requires the appearance of the prototype to be similar to the design product, or the same as the product, and does not require it to play any role. Products like this are not enough for sales, mainly for exhibition, in order to do a good job in early publicity.
而结构手板是可以活动的，可以看到功能的手板，结构手板里面是空心的，可以用来装电子零件，也可以当做成品来使用,例如汽车模型，结构手板就必须有车身、轮子、车门等等，一般只要是实物外观上有的都要有，而且都是零散工件组装起来的，所以结构手板制作起来相对比较复杂，每个位置大小要做到非常精确，否则安装起来就会出现问题。
The structural prototype can be movable and functional. It is hollow inside and can be used to hold electronic parts or as a finished product. For example, for a car model, the structural prototype must have a car body, wheels, doors and so on. Generally, as long as it is physical, it must have some, and it is assembled with scattered pieces. Therefore, the structural prototype is relatively complex to make, The size of each position must be very accurate, otherwise there will be problems during installation.
以上就是小编为大家分析的有关3D打印结构手板和外观手板模型有什么区别的介绍，希望可以给大家提供参考。您有疑惑可以随时来我我么网站http://dcjzl.com咨询！
The above is the introduction about the difference between 3D printing structural prototype and appearance prototype analyzed by Xiao Bian for you, and I hope it can provide you with reference. If you have any doubts, you can come to our website at any time http://dcjzl.com consulting service
相关资讯
手板制作加工时注意事项
2024-04-11手板加工如何服务好客户?
2024-04-09手板加工的过程及方式
2024-04-06快速成型的基本原理构成有哪些？
2024-02-27工业产品设计中常见手板件的制作方式
2024-02-23ABS手板模型的优势有哪些？
2024-02-21铝合金手板模型制作手法与维护
2024-02-10铝合金手板模型的氧化工艺介绍
2024-02-10汽车手板模型制作的低压灌注工艺
2024-02-06手把手教你怎么选机箱机柜定制工厂
2024-01-27
