在手板模型加工过程中咱们会尽量避免有失误的情况出现，但是在定制加工工作当中，想要不犯错几率很小。那么北京手板模型加工出错之后如何补救？

In the process of prototype processing, we will try our best to avoid mistakes, but in the process of customization processing, the probability of not making mistakes is very small. How to remedy the mistakes in Beijing prototype processing?

1、一些手板模型出现较大的失误就不可补救了，只能报废，像透明件PMMA，PC等，因为透明工件是不许有粘接痕迹的。

1. Some prototype models cannot be remedied if there are big mistakes, and they can only be scrapped, such as transparent parts PMMA, PC, etc., because transparent parts are not allowed to have bonding traces.

2、一些工件是可以进行补救的，工件为非透明件，像ABS，POM，PA等，一般都是针对塑胶件进行补救。补救的方法一般可用补救材料填在过切或错切的地方，常用的补救材料是502胶水混合痱子粉或原子灰。取适量痱子粉加入502胶水调成稀糊状即可成为502胶水混合痱子粉，将调好的材料填入过切的地方待干后再补加工一下即可。

2. Some workpieces can be remedied. The workpieces are non transparent, such as ABS, POM, PA, etc. They are generally remedied for plastic parts. Remedial materials can be used to fill in the place of over cutting or wrong cutting. The commonly used remedy materials are 502 glue mixed with prickly heat powder or putty. Take a proper amount of prickly heat powder and add 502 glue to make it into a thin paste, which can be made into 502 glue mixed prickly heat powder. Fill the prepared materials in the cut area to be dried and then re processed.

要注意：

Note:

对生产程序进行规划，提高材料使用率的同时提高工作效率。我们在北京手板模型加工之前，一定要了解加工内容，根据加工的内容合理的安排安装基面、加工基面，这样就能实现对原材料进行一个合理的采购，提高材料的利用率，减少浪费的同时也提高了手板加工的效率。

Plan production procedures to improve material utilization and work efficiency. Before processing the prototype in Beijing, we must understand the processing content, reasonably arrange the installation base plane and processing base plane according to the processing content, so that we can achieve a reasonable purchase of raw materials, improve the utilization rate of materials, reduce waste and improve the efficiency of prototype processing.

注意在多次成型过程中产生的热变形在制作复杂零件的时候，虽然要经过多次的成型的技术，但是为了获得精美的零件的话，我们一定要注意在加工的过程中由于热产生的变形，我们一定要在制作安装的过程中小心零件的尺寸。

Pay attention to the thermal deformation generated in the process of multiple molding. Although it is necessary to go through multiple molding technologies when making complex parts, we must pay attention to the thermal deformation generated in the process of processing in order to obtain beautiful parts. We must be careful about the size of parts during the process of manufacturing and installation.

手板加工过程中因为材料性能很脆易裂，又不能有粘接痕迹，在加工过程中要特别注意，在加工手板模型的时候一定是需要非常的谨慎、专注的。更多相关的信息就来我们网站http://dcjzl.com进行咨询吧！

Due to the brittle material properties and no bonding traces, special attention should be paid during the processing of the prototype. It must be very careful and focused when processing the prototype. For more information, please come to our website http://dcjzl.com Consult!