Most people will ask you how many boards you need to make. In this case, we want to know that for hand board model customized OEM products, we need to provide corresponding design drawings, we need to know the specific size of the customer, after knowing the relevant data, we need to refer to other factors to calculate the standard price, which is the demand price of the whole product. For the same similar products, the process price is different, and the cardboard model price is According to the three-dimensional graphic analysis of the product size, as well as the required process and processing time to quote. Of course, different manual processing technology has different price reference factors.

　　3 d打印的主要是根据重量计算的材料和其他表面处理成本,如果你想做手适合3 d印刷,我们可以根据你的3 d图纸来计算你的手所需要的原材料的重量(通常是一个g),然后乘以每克原材料的,原材料的也低,高材料也是分层,就是要看3d印刷机的应用和客户的要求，材料越好自然越贵。

　　The price of 3D printing is mainly based on the weight of materials and other surface treatment costs. If you want to make a hand suitable for 3D printing, we can calculate the weight of raw materials (usually a g) required by your hand according to your 3D drawing, and then multiply by the price of raw materials per gram. The price of raw materials is also low, and high materials are also layered, which depends on the application of 3D printing machine and the needs of customers The better the material, the more expensive it will be.

　　如果你做的是数控hand-board,考虑你需要的面板表面处理有什么要求,技术的使用,越高自然也越多,第二,取决于面板的大小和复杂性,正比于这两个因素与板材的,尺寸越大,材料更重要的是,复杂性越高,难度越大,越浪费时间,自然也高;是看精度要求，如果精度要求很高(如0.01mm)，对设备加工精度和工艺及手工要求也会提高，生产成本增加，所以也会有所变化。

　　If you are doing CNC hand board, first of all, consider what requirements do you need for panel surface treatment. The higher the price is, the more natural it will be. Second, it depends on the size and complexity of the panel, which is directly proportional to the price of the panel. The larger the size is, the more important the material is, the higher the complexity, the more difficult it is, the more time is wasted, and the price is naturally high. Finally, look at the accuracy requirements , if the accuracy requirements are very high (for example, 0.01mm), the processing accuracy, process and manual requirements of the equipment will also be improved, and the production cost will increase, so the price will also change.

　　如果需要做批量手版需要真空复制的工艺，手版的应该从手版的，硅胶模具的，每个复制手版的来计算。这是因为需要CNC或3D打印提前做一个真空复制模具的手模，然后根据手模制作硅胶模具，再通过硅胶模具复制产品。

　　If it is necessary to make a batch of hand plates that need vacuum copying process, the price of the hand plate should be calculated from the price of the hand plate, the price of silica gel mold, and the price of each copy of the hand plate. This is because CNC or 3D printing is needed to make a vacuum copy of the mold in advance, then make silica gel mold according to the mold, and then copy the product through silica gel mold.