It's necessary to take good care of the medical case. The quality of the case depends on our careful care in every step.

步从选材要选择的冷轧钢板。机箱机柜经过剪裁，焊接，打磨，组装等相关程序步步把关才能使质量具有水准。

The first step is to select high-quality cold-rolled steel plate from the material selection. After cutting, welding, polishing, assembling and other related procedures, the quality of the cabinet can reach the international standard.

第二步，我们在选择的机箱机柜时候，考虑的应是性，一丝一毫不能松懈。将执行关键任务的IT设备装进能上锁的机柜里会让网络管理员倍感轻松，这样也限制了能够打开机柜的人数。

Second, when we select the cabinet, we should first consider the safety, and we should not relax at all. Putting mission critical it equipment in a lockable cabinet makes it easier for network administrators, which also limits the number of people who can open the cabinet.

第三步，在选购医疗机箱机柜时，所有装在机柜内的设备和它们完整的测量数据：高、长、宽、重量。设备的总高度将更终决定可以把多少设备装进机柜。显然，高的机柜能装进更多的设备，而且更省地方。当然尽量利用机柜的高度不是的考虑，机柜的后部也有很大的地方可以利用。这就是要测量机柜深度的原因。选择较深的机柜，可以把两套设备背靠背地装进去，从而安装更多的设备。采用上述方式可在机柜中装入两排设备，一排从机柜的前门装卸，另一排从后门装卸。机柜应有可调节的垂直导轨架，可以装入不同深度的设备，同时使机柜根据设备的深度而保持更小深度。

Step 3: when purchasing the medical case cabinet, all the equipment installed in the cabinet and their complete measurement data: height, length, width and weight. The total height of the equipment will ultimately determine how much equipment can be put into the cabinet. Obviously, a high cabinet can accommodate more equipment and save more space. Of course, it is not the only consideration to make the most of the height of the cabinet. There is also a large space in the back of the cabinet. This is why the cabinet depth is to be measured. Choose a deeper cabinet, you can install two sets of equipment back-to-back, so as to install more equipment. In the above way, two rows of equipment can be installed in the cabinet, one is loaded and unloaded from the front door of the cabinet, and the other is loaded and unloaded from the back door. The cabinet shall have adjustable vertical guide rail frame, which can be installed into equipment of different depths, and keep the cabinet at the minimum depth according to the depth of equipment.